HotSpots

All Proceeds Go to Support Our Repeater.

 

*** DMR, D-Star, Fusion, P-25, NXDN Ready !!!
1. SMA Antenna Standard
2. Extra Large Main HEAT SINK – Standard
4. Display (OLED .96″) Standard
    5. UHF/VHF
6. Includes USB cable to power it from your computer

 

QC process on all builds to assure we maintain the high standards of all custom Hot Spots.
1. Pi-0w/ Hats / Images are tested as a unit after custom soldering
2. Current draw is tested to assure soldering is 100% good
3. New builds are burned in for 24 hours before shipping.
4. Images are then custom programmed for customer WIFI connection(s)
5. Pi-Star dashboard is verified ALL GREEN connect indicators

 

Raspberry Pi0-W Motherboard (only) Technical Specs . . .

-On board WiFi
-Broadcom BCM2835 1GHz processor with 512MB RAM
-Mini HDMI and USB On-The-Go ports
-Micro USB power
-40-pin GPIO connector (20 populated)
– 16 gb Scandisk micro SDHC card included !

UPS Ground Shipping to Lower 48 States Only!

Buy two and get free shipping!

>>>> Find the hidden Coupon Code on Home Page, enter it at checkout for 10% discount! <<<<

Custom orders. Please allow up to 5 business days to ship.

All HotSpots have latest Pi-Star Ver: 4.1.2

Black Ice      In Stock: 1

$159.95 USD

Lower 48 States Only!

*** DMR, D-Star, Fusion, P-25, NXDN Ready !!!
1. SMA Antenna Standard
2. Extra Large Main HEAT SINK – Standard
4. Display (OLED .96″) Standard
    5. UHF/VHF
6. Includes USB cable to power it from your computer
7. Do “NOT” use phone charger. Requires 5 volt 2.5 amp.

 

 

Black Ice II   UHF Only   In Stock: 2

$149.95 USD

Lower 48 States Only!

*** DMR, D-Star, Fusion, P-25, NXDN Ready !!!
1. SMA Antenna Standard
2. Extra Large Main HEAT SINK – Standard
4. Display (OLED .96″) Standard
    5. UHF Only
6. Includes USB cable to power it from your computer
7. Do “NOT” use phone charger. Requires 5 volt 2.5 amp.

Woody        Out Of Stock.

$159.95

Lower 48 States Only!

*** DMR, D-Star, Fusion, P-25, NXDN Ready !!!
1. SMA Antenna Standard
2. Extra Large Main HEAT SINK – Standard
4. Display (OLED .96″) Standard
    5. UHF/VHF
6. Includes USB cable to power it from your computer
7. Do “NOT” use phone charger. Requires 5 volt 2.5 amp.

Woody II     UHF Only  In Stock 2

$149.95

Lower 48 States Only!

*** DMR, D-Star, Fusion, P-25, NXDN Ready !!!
1. SMA Antenna Standard
2. Extra Large Main HEAT SINK – Standard
4. Display (OLED .96″) Standard
    5. UHF Only
6. Includes USB cable to power it from your computer
7. Do “NOT” use phone charger. Requires 5 volt 2.5 amp.

Clear/Lime Green Bottom      In Stock: 1

$159.95

Lower 48 States Only!

*** DMR, D-Star, Fusion, P-25, NXDN Ready !!!
1. SMA Antenna Standard
2. Extra Large Main HEAT SINK – Standard
4. Display (OLED .96″) Standard
    5. UHF/VHF
6. Includes USB cable to power it from your computer
7. Do “NOT” use phone charger. Requires 5 volt 2.5 amp.

I’m just a Fusion guy. I only set these up to connect to your WIFI and for YSF. If you are using Dstar or whatever you will have to setup the dashboard for the settings in your radio.

You will receive a purchase conformation email. Reply to this email with your Call Sign and Radio you’ll be using with your HotSpot. DMR ID if you have one. Name of your WIFI connection and password. If you don’t know the name of your WIFI connection and password, just watch the tutorial video below to connect for the first time and get familiar with using your dashboard. If you have any further questions after you receive your New HotSpot just send me an email.